HOME TESTIMONIALS TERMS & CONDITIONS CONTACT






Lost Password?
Forgot your username?
No account yet? Register

Show Cart
Your Cart is currently empty.

 
Tech info on MP- Variable Swirl Valve

Find your vehicle...

Tuning Technical Information

We are increasingly getting inquiries from customers having problems with standard vehicles. They are being frustrated with New Car Dealers who are not listening to their complaints about their vehicles poor Economy or Performance. Dealers are finding themselves caught in the middle as manufacturers dumb down the test procedures which the dealers are only allowed to carry out. They are only permitted to replace what their Diagnostic Equipment determines, so faulty sensors sending incorrectly calibrated signals, result in the Diagnostic Equipment not seeing the real faults. These Pages are here to give you a better understanding of how your vehicle works & help you diagnose problems you are having with your vehicle.

VSV (Variable Swirl Valve)




This is the Vehicle Industries version of the Hiclone Fuelsaver (see www.fuelsaver.com.au). Hiclones are normally placed in the largest diameter sections of the engine inlet system. The manufacturer’s VSV valves are placed in the inlet ports, which are the most restrictive point of the inlet system. Every modern engine has two inlet valves per cylinder, the VSV is located in one these inlet ports on each cylinder. For most of the driving time it shuts off the airflow completely through half the engines inlet ports. The permanently open port is angled to cause the airflow entering the cylinder to naturally swirl, improving combustion, emissions & torque. But the VSV system frequently fails; meaning the second inlet port never opens & restricts high rpm performance by halving the engine’s intended airflow. This commonly happens on Mercedes / Jeep V6, Audi / VW / Porsche (VAG) early V6, & costs a few thousand dollars to fix. The newer VAG V6 now has a single VSV valve located in a similar position & distance from combustion as what has been recommended by the Hiclone Company for the last 20 years. Adding Hiclones to these engines along with a Diesel Tuning System has proven benefits. It is only possible to add fuel to the point where the Air/Fuel ratio allows it to still burn. Hiclone increases the engines ability to burn fuel. So more power can be generated by - combining Hiclone & a Tuning System, than just the Tuning System alone. Hiclone also helps the engine to run cleaner, the swirling vortex helps to carry the soot particles from the EGR system to the combustion chamber, instead of them landing on the inside surface of the inlet manifold.

Buy a Morepower Tuning Box for my vehicle.

Find out more about:

Fuel Pressure Myth

Why does the Dyno graph show all the power gain at only high RPM?

Throttle Position Sensor & Accelerator Pedal Position Sensor

Fuel Delivery systems

MAP & MAF Sensors

VNT - Turbo Control

DPF & EGR

Technical info on Morepower Tuning

Morepower Tuning Overview

www.morepower.com.au is the only company which has all of the different styles of Tuning Systems available within our product range and are able to provide the system which best suits the individual engine.

 

 
 
© 2011 Hiclone Pty Ltd     |     Website Design & Engineering by Allwelt International     |     Admin